What we clean
Every surface takes a different pressure and a different solution. Getting that wrong is how siding gets streaked and shingles lose their granules — so we don't.
Roof soft washing
Those black streaks are gloeocapsa magma — an algae that feeds on the limestone in your shingles. Pressure washing a roof strips the granules and shortens its life. Soft washing kills the growth at low pressure and leaves the shingle intact.
- Asphalt shingle & metal roofs
- Manufacturer-safe low pressure
- Plants pre-soaked & rinsed
- Results that last, not a rinse
House washing
A full exterior wash takes off the green mildew on the north side, the dust and pollen film, the spider webs under the eaves and the dirt line along the bottom course. Vinyl, brick, stone and metal siding all welcome.
- Vinyl siding
- Brick
- Metal & steel
- Soffit & fascia
- Porches
- Shutters
- Exterior doors
Concrete & driveways
We use a rotary surface cleaner rather than a wand, so the whole slab gets an even pass and you don't end up with the zebra striping that a wand leaves behind. Driveways, sidewalks, patios, pool surrounds and garage floors.
- Even finish, no wand stripes
- Rust, oil & organic staining
- Edges & expansion joints detailed
- Paver patios & pool surrounds
Decks & fences
Grey, tired-looking timber usually isn't finished — it's just dirty. Cleaned at the right pressure, most decks come back to full colour. Too much pressure raises the grain and ruins the board, so this one is all about restraint.
- Wood decks & stairs
- Composite decking
- Vinyl & wood fencing
- Pergolas & railings
Planning to stain? Wash first, let it dry, then stain — it's the difference between a finish that lasts and one that peels in a season.
Commercial exteriors
A dirty building reads as a business that doesn't care. We clean storefronts, shops, offices, awnings and metal buildings — and we schedule around you, before opening or after closing, so your customers never see the hose.
- Storefronts
- Awnings & canopies
- Metal buildings
- Sidewalks & entries
- Dumpster pads
- Signage
Gutters — inside and out
Two different jobs, and we do both. Brightening takes the black vertical stripes off the face of your gutters — that's oxidised residue, and a rinse won't shift it. Cleaning out clears the leaves and grit from inside the trough so the water actually goes where it's meant to.
Blocked downspouts get snaked out too. Brightening is usually paired with a house wash — there's no point in bright siding sitting under a dirty gutter line.
- Gutter face brightening
- Gutter clean-outs
- Downspouts snaked
- Soffit & fascia
How we work
Walk the property
We look at what we're actually dealing with before a hose comes off the trailer.
Protect what's growing
Plants and shrubs get soaked down before and rinsed after. Every time.
Right pressure, right mix
Soft wash for roofs and siding, surface cleaner for flat concrete.
Final walkthrough
We go round it with you before we leave. Anything missed gets done there and then.
Not sure what it needs?
Send a photo and we'll tell you straight — including if it doesn't need doing yet.